Fiber Laser Welder Video
Introduction of Laser Welder Machine
Aluminum laser welder is mainly aimed at the laser welding of long-distance and large workpieces, overcoming the limitation of the travel space of the worktable, the heat-affected area during welding is small, and it will not cause the problem of work deformation, blackening, and traces on the back, and the welding depth is large and the welding is firm, fully melted, not only can achieve thermal conduction welding, but also continuous deep penetration welding, spot welding, butt welding, stitch welding, sealing welding, seam welding and so on.
This process subverts the working mode of the traditional laser welding machine. Aluminum laser welding machine has the advantages of simple operation, beautiful welding seam, fast welding speed, and no consumables. It can weld thin stainless steel plates, iron plates, galvanized plates and other metal materials, laser welding aluminum machine can perfectly replace traditional argon arc welding, stainless steel plate, iron plate, aluminum plate and other metal materials welding.
Advantages of Handheld Fiber Laser Welder:
1. Aluminum laser welder welding range is wide: Aluminum laser welding machine is equipped with 5m-10M original optical fiber, which overcomes the limitation of workbench space and can be used for outdoor welding and long-distance welding;
2. Aluminum laser welder is convenient and flexible to use: laser welding aluminum machine is equipped with moving pulleys, which are comfortable to hold, and can be adjusted at any time without the need for a fixed station, which is free and flexible and is suitable for various working environment scenarios.
3. Aluminum laser welding machine has a variety of welding methods: Aluminum laser welder can realize welding at any angle: stitch welding, butt welding, vertical welding, flat fillet welding, inner fillet welding, outer fillet welding, etc. Weld. Welding at any angle can be achieved. In addition, laser welding aluminum can also complete cutting, welding and cutting can be switched freely, just change the welding copper nozzle to the cutting copper nozzle, which is very convenient.
Applications of Aluminum Laser Welding Machine:
The aluminum laser welder is often used in the automotive industry, such as in car trunks. The trunk of the car is composed of the trunk lid and the rear panel. Since the forming has a 90-degree angle, it is most suitable to use an aluminum laser welding machine for welding. The traditional trunk welding is carried out by MLG brazing, which is difficult to form a smooth weld, and the pollution is large.
If laser brazing is used, the welding speed is high, the welding seam is well formed, the quality is stable, the galvanized layer is less burned, and the deformation is small. The bar is a special-shaped part. The traditional stamping method is very complicated, and the parts are prone to deformation and stress.
The laser method does not require a complex fixture system, has no processing stress, and has no deformation of the incision, which is more suitable for post-processing and installation.
As an industry closely related to people’s lives, kitchen utensils have been continuously updated and emerging in recent years. In this industry, range hoods, gas appliances, stove panels, ovens, disinfection cabinets, large overall cabinets, etc., require a lot of welding of sheet metal parts. The beauty of the weld and the quality of the weld have always been two major problems!
The popularity of laser welding aluminum machine applications has brought an epoch-making leap to the welding quality of kitchenware products! Successfully solved the difficulties and pain points of kitchen utensil welding.
The aluminum laser welder comes with a 2-year warranty. You can see the warranty card, service card, etc. on the machine. During the warranty period, if any parts are damaged, we will provide you with new parts for free, and the freight will be borne by us (you will never need to return the old parts, some manufacturers will ask customers to return the damaged parts)
Even if your machine is out of warranty, if you encounter any problem, you can call our service center or contact your salesperson. We will help you solve the problem within 24 hours. We have a team of English-speaking after-sales engineers to serve you.
How to maintain the machine
This machine does not need so much maintenance, as long as there is water in it, the chiller needs to be replaced. Generally, purified water and distilled water can be used.
1. Every 2-3 days, take out the protective lens of the machine and check whether there is dust inside. If there is dust to protect the lens, just use alcohol (99.99% pure) to clean it. If the protective lens is not clean, the laser output power will be reduced and the focusing lens will also be damaged.
2. The chiller should be replaced with purified water or distilled water once a month
Want to Get the Aluminum Laser Welder Price?Get Free Consultation Now!!!